Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 191
Cisco TelePresence SX80 API Reference Guide
Network status
xStatus Network
Shows the top level overview of the network status.
xStatus Network 1 Ethernet MacAddress
Shows the MAC (Media Access Control) address for the Ethernet interface.
Value space of the result returned:
<String>
Example:
xStatus Network 1 Ethernet MacAddress
*s Network 1 Ethernet MacAddress: "00:50:60:02:FD:C7"
** end
xStatus Network 1 Ethernet Speed
Shows the Ethernet speed in Mbps. The speed can be in full-duplex or half-duplex.
Value space of the result returned:
<"10 h al f "/"10 f u l l "/ "10 0 ha l f "/ "10 0 f u l l "/"10 0 0 f u l l ">
Example:
xStatus Network 1 Ethernet Speed
*s Network 1 Ethernet Speed: "100full"
** end
xStatus Network 1 IPv4 Address
Shows the IPv4 address that uniquely identifies this system.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 Address
*s Network 1 IPv4 Address: "192.0.2.149"
** end
xStatus Network 1 IPv4 SubnetMask
Shows the subnet mask which determines which subnet an IPv4 address belongs to.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 SubnetMask
*s Network 1 IPv4 SubnetMask: "255.255.255.0"
** end
xStatus Network 1 IPv4 Gateway
Shows the address of the IPv4 gateway.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 Gateway
*s Network 1 IPv4 Gateway: "192.0.2.10"
** end
xStatus Network 1 IPv4 DHCP TftpServerAddress
Returns the IP address of the TFTP server (provisioning server) as assigned by DHCP, provided that
the DHCP server supports option 150. This status is used only when xConfiguration Provisioning
Mode is CUCM.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP TftpServerAddress
*s Network 1 IPv4 DHCP TftpServerAddress: "192.0.2.0"
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g