Cisco TelePresence SX80 - Presentation Commands

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 123
Cisco TelePresence SX80 API Reference Guide
xCommand Phonebook Search PhonebookType:Corporate Limit:2
FolderId:"corporate _ 001"
OK
*r ResultSet ResultInfo TotalRows: 25
*r ResultSet Contact 1 Name: "John Doe (office)"
*r ResultSet Contact 1 ContactId: "localContactId-3"
*r ResultSet Contact 1 ContactMethod 1 ContactMethodId: "1"
*r ResultSet Contact 1 ContactMethod 1 Number: "H323:John.Doe.Office@
company.com"
*r ResultSet Contact 1 ContactMethod 1 Protocol: H323
*r ResultSet Contact 1 ContactMethod 2 ContactMethodId: "2"
*r ResultSet Contact 1 ContactMethod 2 Number: "SIP:John.Doe.Office@
company.com"
*r ResultSet Contact 1 ContactMethod 2 Protocol: SIP
*r ResultSet Contact 2 Name: "John Doe (home)"
*r ResultSet Contact 2 ContactId: "localContactId-4"
*r ResultSet Contact 2 ContactMethod 1 ContactMethodId: "3"
*r ResultSet Contact 2 ContactMethod 1 Number: "H323:John.Doe.Home@
company.com"
*r ResultSet Contact 2 ContactMethod 1 Protocol: H323
*r ResultSet Contact 2 ContactMethod 2 ContactMethodId: "4"
*r ResultSet Contact 2 ContactMethod 2 Number: "SIP:John.Doe.Home@company.
com"
*r ResultSet Contact 2 ContactMethod 2 Protocol: SIP
Presentation commands
xCommand Presentation Start
Open a media stream from the selected presentation source.
PresentationSource: Select the video input source to be used for presentation.
SendingMode: Select whether the presentation is shown locally or locally and remotely.
Instance: Select which local presentation you wish to start.
Requires user role: USER
Parameters:
PresentationSource: <1..4>
ConnectorId: <1..5>
SendingMode: <LocalRemote/LocalOnly>
Instance: <New / 1 / 2 / 3 / 4 / 5 / 6>
SendingMode: <1 – 4>
Example:
xCommand Presentation Start PresentationSource:2
xCommand Presentation Stop
Stop the media stream from the presentation source.
Instance: Select which local presentation you wish to stop.
Requires user role: USER
Parameters:
Instance: <1 / 2 / 3 / 4 / 5 / 6>
Example:
xCommand Presentation Stop
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand