Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 62
Cisco TelePresence SX80 API Reference Guide
xConfiguration Provisioning ExternalManager Path
Set the Path to the external manager / provisioning system. This setting is required when several
management services reside on the same server, i.e. share the same External Manager address.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example:
xConfiguration Provisioning ExternalManager Path: "tms/public/external/
management/SystemManagementService.asmx"
xConfiguration Provisioning ExternalManager Domain
Enter the SIP domain for the VCS provisioning server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example:
xConfiguration Provisioning ExternalManager Domain: "any.domain.com"
RTP configuration
xConfiguration RTP Ports Range Start
Specify the first port in the range of RTP ports.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP media
data. Each media channel is using two adjacent ports for RTP and RTCP. The default number of
ports required in the UDP port range is based on the number of simultaneous calls that the endpoint
is capable of.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1024..65438>
Range: Select a value between 1024 and 65438.
Example:
xConfiguration RTP Ports Range Start: 2326
xConfiguration RTP Ports Range Stop
Specify the last RTP port in the range.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP media
data. Each media channel is using two adjacent ports for RTP and RTCP. The default number of
ports required in the UDP port range is based on the number of simultaneous calls that the endpoint
is capable of.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1120..65535>
Range: Select a value between 1120 and 65535.
Example:
xConfiguration RTP Ports Range Stop: 2486
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g