Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 207
Cisco TelePresence SX80 API Reference Guide
xStatus SIP Profile 1 Mailbox MessagesWaiting
Indicates how many new messages are in the mailbox.
Value space of the result returned:
<Integer>
Example:
xStatus SIP Profile 1 Mailbox MessagesWaiting
*s SIP Profile 1 Mailbox MessagesWaiting: 0
** end
xStatus SIP Profile 1 CallForward Mode
Indicates whether the call forward mode for SIP is set to on or off.
Value space of the result returned:
<On/Off>
Example:
xStatus SIP Profile 1 CallForward Mode
*s SIP Profile 1 CallForward Mode: Off
** end
xStatus SIP Profile 1 CallForward URI
Indicates the address the incoming calls are directed to when call forward mode is set on.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile 1 CallForward URI
*s SIP Profile 1 CallForward URI: ""
** end
xStatus SIP Profile 1 CallForward DisplayName
Returns the URI that is displayed on the user interface for the forwarded call.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile 1 CallForward DisplayName
*s SIP Profile 1 CallForward DisplayName: ""
** end
xStatus SIP Profile 1 Registration [n] Status
Shows the status of the registration to the SIP Proxy Server.
Deregister: The system is in the process of de-registering to the SIP Proxy.
Failed: The system failed to register to the SIP Proxy.
Inactive: The system is not registered to any SIP Proxy.
Registered: The system is registered to the SIP Proxy.
Registering: The system is in the process of registering to the SIP Proxy.
Value space of the result returned:
<Deregister/Failed/Inactive/Registered/Registering>
Example:
xStatus SIP Profile 1 Registration 1 Status
*s SIP Profile 1 Registration 1 Status: Registered
** end
xStatus SIP Profile 1 Registration [n] Reason
Shows a message to explain the reason why the SIP registration failed.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile 1 Registration 1 Reason
*s SIP Profile 1 Registration 1 Reason: "404 Not Found"
** end
xStatus SIP Profile 1 Registration [n] URI
Shows the URI used for registration to the SIP Proxy server.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile 1 Registration 1 URI
*s SIP Profile 1 Registration 1 URI: "firstname.lastname@company.com"
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g