Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 168
Cisco TelePresence SX80 API Reference Guide
Diagnostics status
xStatus Diagnostics
Shows the top level overview of the diagnostics. The example shows the status for an ongoing call.
The identities of the call and channels are used when querying additional information.
xStatus Diagnostics Call [n] Channels IncomingAudioChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels IncomingVideoChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels IncomingDataChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingAudioChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingVideoChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingDataChannel [n] Netstat 1 Jitter
Shows the jitter at the present moment in the incoming/outgoing channel, as specified by RFC
3550.
Value space of the result returned:
<Integer>
Example:
xStatus Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1
Jitter
*s Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1 Jitter:
0
** end
xStatus Diagnostics Call [n] Channels IncomingAudioChannel [n] Netstat 1 Packets
xStatus Diagnostics Call [n] Channels IncomingVideoChannel [n] Netstat 1 Packets
xStatus Diagnostics Call [n] Channels IncomingDataChannel [n] Netstat 1 Packets
xStatus Diagnostics Call [n] Channels OutgoingAudioChannel [n] Netstat 1 Packets
xStatus Diagnostics Call [n] Channels OutgoingVideoChannel [n] Netstat 1 Packets
xStatus Diagnostics Call [n] Channels OutgoingDataChannel [n] Netstat 1 Packets
Shows the number of packets received/sent in the incoming/outgoing channels.
Value space of the result returned:
<Integer>
Example:
xStatus Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1
Packets
*s Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1 Packets:
405
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g