Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 107
Cisco TelePresence SX80 API Reference Guide
Cameras commands
xCommand Cameras SpeakerTrack Activate
Activate SpeakerTrack mode. Requires that xConfiguration Cameras SpeakerTrack Mode is set to
Auto (default).
This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera.
The SpeakerTrack 60 camera assembly consists of two cameras and uses an audio tracking
technique that finds and captures a close-up of the active speaker. When a change of speaker is
detected, the system can switch automatically between the two cameras to always show the best
camera view.
Requires user role: USER
Example:
xCommand Cameras SpeakerTrack Activate
xCommand Cameras SpeakerTrack Deactivate
Deactivate SpeakerTrack mode.
This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera.
The SpeakerTrack 60 camera assembly consists of two cameras and uses an audio tracking
technique that finds and captures a close-up of the active speaker. When a change of speaker is
detected, the system can switch automatically between the two cameras to always show the best
camera view.
Requires user role: USER
Example:
xCommand Cameras SpeakerTrack Deactivate
xCommand Cameras SpeakerTrack Whiteboard ActivatePosition
Moves the specified camera in a SpeakerTrack 60 to the position stored with xCommand Cameras
SpeakerTrack Whiteboard StorePosition.
Camera: Select either right or left camera.
WhiteboardId: The id set for the camera position used for the snap-to-whiteboard feature. Currently
only id 1 can be used.
Requires user role: ADMIN
Parameters:
Camera (r): <Left/Right>
WhiteboardId: <0-65534>
Example:
xCommand Cameras SpeakerTrack Whiteboard ActivatePosition Camera:Left
WhiteboardId:123
xCommand Cameras SpeakerTrack Whiteboard AlignPosition
Align the position of the other camera on a SpeakerTrack 60 to the first cameras stored position.
You must also set the distance to a whiteboard.
Camera: Select either right or left camera.
Distance: Set distance to whiteboard in millimeters. Use an accurate measurement for the feature to
work seamlessly.
Requires user role: ADMIN
Parameters:
Camera (r): <Left/Right>
Distance (r): <3000-15000>
Example:
xCommand Cameras SpeakerTrack Whiteboard AlignPosition Camera:Left
Distance:8000
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g