Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 165
Cisco TelePresence SX80 API Reference Guide
xStatus Conference Site [n] BookingId
Shows the booking ID of a conference (if assigned). The booking ID can be used for easy identifica-
tion of a call or conference.
Value space of the result returned:
<String>
Example:
xStatus Conference Site 2 BookingId
*s Conference Site 33 BookingId: "MyConference"
** end
xStatus Conference Site [n] SecurityStatus
Security status of a call represents the least of the security statuses of all the endpoints involved in
a CUCM call.
Invalid: Initial status.
Unknown: In the absence of the Call-Info header, that CUCM uses to pass this status to the phone,
the phone assumes a value of Unknown.
NotAuthenticated: The current connected call is not signaling authenticated. This call is not secure.
Authenticated: The current connected call is signaling authenticated. This is not a fully secured
call.
Encrypted: Encrypted indicates the current connected call is signaling/media encrypted. This call is
secure.
Value space of the result returned:
<Invalid/Unknown/Authenticated/NotAuthenticated/Encrypted>
Example:
xStatus Conference Site SecurityStatus
*s Conference Site 21 SecurityStatus: Unknown
** end
xStatus Conference Site [n] UnattendedTransfer
Indicates whether Unattended Transfer is available for the call.
Value space of the result returned:
<True/False>
Example:
xStatus Conference Site UnattendedTransfer
*s Conference Site 14 UnattendedTransfer: True
** end
xStatus Conference Site [n] AttendedTransfer
Indicates whether Attended Transfer is available for the call.
Value space of the result returned:
<True/False>
Example:
xStatus Conference Site AttendedTransfer
*s Conference Site 14 AttendedTransfer: True
** end
xStatus Conference Site [n] Appearance
Returns identification for the shared line appearance in the call.
Value space of the result returned:
<Integer>
Example:
xStatus Conference Site Appearance
*s Conference Site 14 Appearance: 0
** end
xStatus Conference Site [n] GCI
Returns Global Call Identification (GCI) of the call. The GCI is used to identify whether the call is
remote or local and it is provided by CUCM.
Value space of the result returned:
<String>
Example:
xStatus Conference Site GCI
*s Conference Site 14 GCI: ""
** end
xStatus Conference Site [n] CalText
Returns the Confidential Access Level (CAL) of the session sent by vendors that support AS-SIP.
Value space of the result returned:
<String>
Example:
xStatus Conference Site CalText
*s Conference Site 14 CalText: ""
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g