EasyManuals Logo

Cisco TelePresence SX80 User Manual

Cisco TelePresence SX80
231 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 159
Cisco TelePresence SX80 API Reference Guide
xStatus Camera [n] Position Zoom
Shows the current zoom (zoom in and out) position of the camera. The value range depends on
camera type.
Value space of the result returned:
<0..65535>
Example:
xStatus Camera 1 Position Zoom
*s Camera 1 Position Zoom: 828
** end
xStatus Camera [n] Position Focus
Shows the current focus position of the camera. The value range depends on camera type.
Value space of the result returned:
<0..65535>
Example:
xStatus Camera 1 Position Focus
*s Camera 1 Position Focus: 4597
** end
xStatus Camera [n] Capabilities Options
Shows the camera capabilities (ptzf = pan, tilt, zoom, focus).
Value space of the result returned:
<String>
Example:
xStatus Camera 1 Capabilities Options
*s Camera 1 Capabilities Options: "ptzf"
** end
xStatus Camera [n] Flip
In Flip mode (vertical flip) the image can be flipped upside down.
Value space of the result returned:
< "A u t o "/ "O n "/ "O f f ">
Example:
xStatus Camera 1 Flip
*s Camera 1 Flip: "Off"
** end
xStatus Camera [n] UpgradeStatus
Returns the status of the camera software upgrade.
None: No upgrade going on at the moment.
Downloading: Downloading the upgrade.
Installing: Installing the upgrade.
Rebooting: Rebooting the system to take the upgrade in use.
Value space of the result returned:
<None/Downloading/Installing/Rebooting>
Example:
xStatus Camera 1 UpgradeStatus
*s Camera 1 UpgradeStatus: None
** end
xStatus Camera [n] DownloadProgress
Indicates how many percent of the new camera software upgrade has been downloaded. Result -1
indicates that the information is not available for that camera type.
Value space of the result returned:
<Integer>
Example:
xStatus Camera 1 DownloadProgress
*s Camera 1 DownloadProgress: 0
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Table of Contents

Other manuals for Cisco TelePresence SX80

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence SX80 and is the answer not in the manual?

Cisco TelePresence SX80 Specifications

General IconGeneral
Maximum frame rate60 fps
Supported video modes720p, 1080p
Video formats supportedH.261, H.262, H.263, H.264, H.265
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecsG.711, G.722, G.722.1, G.729ab
Noise reductionYes
HDMI ports quantity5
DVI-D ports quantity1
USB 2.0 ports quantity2
Product colorSilver
Rack capacity1U
Number of persons0 person(s)
Analog signal format systemNTSC, PAL
Security algorithmsHTTPS, SSH
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsSIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Sensor type-
Image sensor size- \
Weight and Dimensions IconWeight and Dimensions
Depth309.8 mm
Width442 mm
Height44 mm
Weight3650 g

Related product manuals