Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 162
Cisco TelePresence SX80 API Reference Guide
xStatus Conference Presentation Resolution Width
Shows the width of the the presentation.
Value space of the result returned:
<0..4000>
Example:
xStatus Conference Presentation Resolution Width
*s Conference Presentation Resolution Width: 0
** end
xStatus Conference Presentation SiteId
Shows the identity of the system that sends the presentation.
Value space of the result returned:
<0..65535>
Example:
xStatus Conference Presentation SiteId
*s Conference Presentation SiteId: 0
** end
xStatus Conference Presentation LocalSource
Shows the local video input source that is used when the presentation is sent from the local site.
Value space of the result returned:
<1..5>
Example:
xStatus Conference Presentation LocalSource
*s Conference Presentation LocalSource: 0
** end
xStatus Conference Presentation LocalSendingMode
Shows whether the presentations are set to be shown locally and sent to remote side, only shown
locally or not shown at all.
Value space of the result returned:
<Off/LocalRemote/LocalOnly>
Example:
xStatus Conference Presentation LocalSendingMode
*s Conference Presentation LocalSendingMode: Off
** end
xStatus Conference Presentation LastLocalSource
Identifies the last used local presentation source.
Value space of the result returned:
<Integer>
Example:
xStatus Conference Presentation LastLocalSource
*s Conference Presentation LastLocalSource: 2
** end
xStatus Conference Presentation Instance [n] LocalSendingMode
Shows whether a presentation source is shared locally or with a remote participant. There can be
multiple local presentations which all have their own instance.
Value space of the result returned:
<LocalOnly/LocalRemote/Off>
Example:
xStatus Conference Presentation Instance 1 LocalSendingMode
*s Conference Presentation Instance 1 LocalSendingMode: LocalOnly
** end
xStatus Conference Presentation Instance [n] LocalSource
Shows the SourceId for a current presentation. There can be multiple local presentations which all
have their own instance.
Value space of the result returned:
<Integer>
Example:
xStatus Conference Presentation Instance 1 LocalSource
*s Conference Presentation Instance 1 LocalSource: 1
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g