Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 198
Cisco TelePresence SX80 API Reference Guide
Provisioning status
xStatus Provisioning
Shows the top level overview of the provisioning status.
xStatus Provisioning Status
Shows the status of the provisioning.
Failed: The provisioning failed.
AuthenticationFailed: The authentication failed.
Provisioned: The endpoint is provisioned.
Idle: The provisioning is not active.
NeedConfig: The endpoint needs to be configured.
ConfigError: An error occurred during configuration.
Value space of the result returned:
<Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError>
Example:
xStatus Provisioning Status
*s Provisioning Status: Provisioned
** end
xStatus Provisioning Reason
Shows the cause when provisioning has failed.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Reason
*s Provisioning Reason: ""
** end
xStatus Provisioning Server
Identifies the server the system is provisioned to. This address may either be defined in the
xConfiguration ExternalManager Address setting, or provided by DHCP.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Server
*s Provisioning Ser ver: "192.0.2.0"
** end
xStatus Provisioning NextRetry
If provisioning has failed, returns the date and time for the next automatic provisioning attempt.
Value space of the result returned:
<String>
Example:
xStatus Provisioning NextRetry
*s Provisioning NextRetry: "2014-04-30T14:02:22Z"
** end
xStatus Provisioning Software PreviousUpgrade Changed
Shows the date and time for the previous software upgrade.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Software PreviousUpgrade Changed
*s Provisioning Software PreviousUpgrade Changed: "2014-07-06T09:32:39Z"
** end
xStatus Provisioning Software PreviousUpgrade Status
Shows the status of the previous software upgrade.
Value space of the result returned:
<None/InProgress/Failed/InstallationFailed/Succeeded>
Example:
xStatus Provisioning Software PreviousUpgrade Status
*s Provisioning Software PreviousUpgrade Status: None
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g