Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 180
Cisco TelePresence SX80 API Reference Guide
xStatus MediaChannels Call [n] IncomingAudioChannel [n] Transport RTCP Local IpAddress
Shows the local IP address of the Real-time Transport Control Protocol (RTCP) port for the incoming
audio in the media channel.
Value space of the result returned:
<String>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP
Local IpAddress
*s MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP Local
IpAddress: "192.168.24.190"
** end
xStatus MediaChannels Call [n] IncomingAudioChannel [n] Transport RTCP Local Port
Shows the local UDP port number of the Real-time Transport Control Protocol (RTCP) port for the
incoming audio in the media channel.
Value space of the result returned:
<Integer>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP
Local Port
*s MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP Local
Port: 16405
** end
xStatus MediaChannels Call [n] IncomingAudioChannel [n] Transport RTCP Remote
IpAddress
Shows the remote IP address of the Real-time Transport Control Protocol(RTCP) port for the incom-
ing audio in the media channel.
Value space of the result returned:
<String>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP
Remote IpAddress
*s MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP Remote
IpAdd ress: "192.168.136.130"
** end
xStatus MediaChannels Call [n] IncomingAudioChannel [n] Transport RCTP Remote Port
Shows the remote UDP port number of the Real-time Transport Control Protocol(RTCP) port for the
incoming audio in the media channel.
Value space of the result returned:
<Integer>
Example:
xStatus MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP
Remote Port
*s MediaChannels Call 27 IncomingAudioChannel 327 Transport RTCP Remote
Port: 50933
** end
xStatus MediaChannels Call [n] IncomingVideoChannel [n] Encryption Status
Shows the encryption status on the incoming channel.
Value space of the result returned:
<On/Off>
Example:
xStatus MediaChannels Call 27 IncomingVideoChannel 330 Encryption Status
*s MediaChannels Call 27 IncomingVideoChannel 330 Encryption Status: Off
** end
xStatus MediaChannels Call [n] IncomingVideoChannel [n] ChannelRole
Shows if the incoming channel is the main video channel or presentation channel.
Value space of the result returned:
<Main/Presentation>
Example:
xStatus MediaChannels Call 27 IncomingVideoChannel 330 ChannelRole
*s MediaChannels Call 27 IncomingVideoChannel 330 ChannelRole: Main
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g