Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 155
Cisco TelePresence SX80 API Reference Guide
xStatus Call [n] CallType
Shows the call type of the incoming or outgoing call. You can run the command xStatus Call to find
the call identity.
Value space of the result returned:
<Video/Audio/AudioCanEscalate/ForwardAllCall/Unknown>
Example:
xStatus Call 27 CallType
*s Call 27 CallType: Video
** end
xStatus Call [n] RemoteNumber
Shows the remote (far end) number or URI of an incoming or outgoing call. You can run the
command xStatus Call to find the call identity.
Value space of the result returned:
<String>
Example:
xStatus Call 27 RemoteNumber
*s Call 27 RemoteNumber: "5585232"
** end
xStatus Call [n] CallbackNumber
Shows the remote (far end) number or URI of an incoming or outgoing call, including the call proto-
col, for call back. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<String>
Example:
xStatus Call 27 CallbackNumber
*s Call 27 CallbackNumber: "h323:firstname.lastname@company.com"
** end
xStatus Call [n] DisplayName
Shows the name of the remote (far end) participant in an incoming or outgoing call. You can run the
command xStatus Call to find the call identity.
Value space of the result returned:
<String>
Example:
xStatus Call 27 DisplayName
*s Call 27 DisplayName: "firstname.lastname@company.com"
** end
xStatus Call [n] TransmitCallRate
Shows the transmit bandwidth in the call in kilobits per second (kbps). You can run the command
xStatus Call to find the call identity.
Value space of the result returned:
<Integer>
Example:
xStatus Call 27 TransmitCallRate
*s Call 27 TransmitCallRate: 768
** end
xStatus Call [n] ReceiveCallRate
Shows the receive bandwidth in the call in kilobits per second (kbps). You can run the command
xStatus Call to find the call identity.
Value space of the result returned:
<Integer>
Example:
xStatus Call 27 ReceiveCallRate
*s Call 27 ReceiveCallRate: 4000
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g