Cisco TelePresence SX80 - Page 135

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 135
Cisco TelePresence SX80 API Reference Guide
Requires user role: ADMIN
Parameters:
LayoutId(r): <1..2147483647>
FrameId: <1..65535>
PositionX: <0..10000>
PositionY: <0..10000>
Width: <1..10000>
Height: <1..10000>
Layer: <1..6>
Border: <On/Off>
VideoSourceType: <graphic/localInput/localMain/localPresentation/mostSpeaking/mostSpeak-
ing_orderedByPartNumb/otherMain/otherMainRemote/ownMain/participantNumber/presentation/
remoteMain/remotePresentation/videoFile>
VideoSourceId: <0..2147483647>
Example:
xCommand Video Layout Frame Add LayoutId:1 PositionX:100 PositionY:100
Width:9800 Height:9800 Layer:1 Border:off VideoSourceType:localInput
VideoSourceId:1
xCommand Video Layout Frame List
Lists the data related to all layout frames created by command 'xCommand Video Layout Frame
Add' for a specific layout identified by 'LayoutId'
Requires user role: ADMIN
Parameters:
LayoutId: <1..2147483647>
Example:
xCommand Video Layout Frame List LayoutId: 1
xCommand Video Layout Frame Remove
Remove a video frame from an existing layout.
LayoutId: A unique identifier for the layout, which was created when the xCommand Video Layout
Add command was issued.
FrameId: A unique identifier of the frame, which was created when the xCommand Video Frame Add
command was issued.
Requires user role: ADMIN
Parameters:
LayoutId(r): <1..2147483647>
FrameId(r): <1..65535>
Example:
xCommand Video Layout Frame Remove LayoutId:1 FrameId:1
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand