Cisco WS-CE500 User Manual

Networking
Configuring the LAN
Cisco SA500 Series Security Appliances Administration Guide 47
2
This section includes the following topics:
• Default VLAN Settings
• Enabling or Disabling VLAN Support
• Creating VLAN IDs
• Assigning VLANs to LAN Ports
Default VLAN Settings
By default, the data VLAN and the voice VLAN are enabled with the following
settings:
• Data VLAN: The VLAN is enabled with the VLAN ID 1
- VLAN - Data, VLAN Number (untagged packets): 1
- VLAN - Data, IP Address: See Product Tab
- VLAN - Data, IP Address Distribution: DHCP Server
- VLAN - Data, Start IP Address: 192.168.75.50 (assuming LAN IP address
is 192.168.75.1)
- VLAN - Data, End IP Address: 192.168.75.254 (assuming LAN IP address
is 192.168.75.1)
- VLAN - Data, Subnet Mask: 255.255.255.0
- VLAN - Data, Lease Time in Minutes: 1440 (24hours)
- Lease Time in Minutes: 1440 (24hours)
- HTTP Remote Access: disable
- HTTPS Remote Access: disable
• Voice VLAN: The VLAN is enabled with the VLAN ID 100.
- IP Addres s : 10.1.1.1
- IP Address Distribution: DHCP Server
- Start IP Address: 10.1.1.50
- End IP Address: 10.1.1.254
- Subnet Mask: 255.255.255.0

Cisco WS-CE500 Specifications

General

Brand	Cisco
Model	WS-CE500
Category	Network Hardware
Language	English