NOTE:
The contents of the history log will be deleted after programming firmware or configuration into the
controller.
The history log can be displayed on the controller screen or in LiteEdit. If an archive (*.ail file) is saved
in LiteEdit, it will also contain the history log. The archive can be later opened in offline mode to view
the history log offline.
NOTE:
The first history record after the controller is switched on, programmed or a watchdog reset occurs
contains diagnostic values instead of operational values. Some fields in these records may seem to
have nonsense values. Do not take these values into account.
6.16 Exercise timers
There are two exercise timers available in the controller, which are based on the RTC clock. They are
both identical.
Each timer has the following settings (in the Date/Time setpoint group).
To Next Page
Loading...
