ComAp InteliCompact NT

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
137
9 Binary input functions
The following functions can be configured to physical binary inputs (terminals) of the controller and/or
extension modules:
9.1 Common functions
1. GCB Feedback
2. MCB Feedback
3. Emergency Stop
4. Sd Override
5. Access Lock
6. Remote OFF
7. Remote MAN
8. Remote AUT
9. RemControlLock
10. Emergency MAN
11. Start Button
12. Stop Button
13. FaultResButton
14. HornResButton
15. GCB Button
16. ForwSyncDisabl
17. NeutralCB fdb
18. PerFuelConsRes
9.2 MINT specific
MINT only
1. Sys Start/Stop
2. Load Reserve 2
3. Min Run Power
4. Top Priority
9.3 SPtM specific
SPtM only
1. Rem Start/Stop
2. Remote TEST
3. Rem TEST OnLd
4. RevSyncDisable
5. MCB Button
6. Ext MF Relay
7. MainsFailBlock