5.10 Controller language selection
There are two languages available in the controller. The default languages are English and Chinese.
The languages can be changed or modified during configuration in LiteEdit. See the LiteEdit
documentation for details.
To switch the controller language:
1. Display the information screen as described above.
2. While the information screen is still displayed, press the button.
3. The Language menu will appear, use the or buttons to select the desired
language.
4. Press to confirm the selection.
5.11 User interface mode selection
To switch the User interface mode, follow these instructions:
1. Display the information screen as described above.
2. While the information screen is still displayed, press the button twice.
3. The user interface mode menu will appear, use the or buttons to select the
desired mode.
4. Press to confirm the selection.
5.12 Display contrast adjustment
1. Press the button repeatedly until you see the main controller screen with the mode
selector and kW analog meter.
2. Hold down the button and simultaneously press or repeatedly to increase
or decrease the contrast.
To Next Page
Loading...
Need help?
General
