ComAp InteliCompact NT

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
211
Setpoint: PowerSwitch ON
Group
AnalogSwitches
Range [units]
0 … 32000 [kW]
Related
applications
All
Description
On level for power switch activation, see Power switch chapter.
Setpoint: PowerSwitchOFF
Group
AnalogSwitches
Range [units]
0 ... 32000 [kW]
Related
applications
All
Description
Off level for power switch activation, see Power switch chapter.
16.1.14 Group: Date/Time
Setpoint: Time Stamp Per
Group
Date/Time
Range [units]
0 … 240 [min]
Related
applications
All
Description
If the gen-set is running, the Time stamp records are written periodically into
the history. Use this setpoint to adjust the period in which these records are
written. Adjust the setpoint to 0 to disable this function.
NOTE:
The shorter the timestamp period, the earlier the history log will be
overwritten by Time stamp records. For example, if the period is set to 1 min,
the history will be overwritten after approx. 2 hours of continuous operation.
Setpoint: #SummerTimeMod
Group
Date/Time
Range [units]
DISABLED, WINTER, SUMMER, WINTER-S, SUMMER-S [-]
Related
applications
All
Description
 DISABLED: time mode switching is disabled.
 WINTER: northern hemisphere winter time is valid for the current
time period.
 SUMMER: northern hemisphere summer (daylight saving) time is
valid for the current time period.
 WINTER-S: southern hemisphere winter time is valid for the current
time period.
 SUMMER-S: southern hemisphere summer (daylight saving) time is
valid for the current time period.