ComAp InteliCompact NT Reference Guide

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
159
15 Language support
The controller contains memory slots for 2 languages. English and Chinese are provided in the default
archives. The languages can be changed in the LiteEdit software using dictionaries. There are two
types of dictionaries:
 Default dictionaries are distributed together with the controller firmware.
 Custom dictionaries are created by the user during the translation process.
The custom dictionary is used for storing translations that were made by the user because there was
no default dictionary for the particular language, the default dictionary was incomplete or the user
simply wishes to have different translations. For more information about languages and translations,
see the LiteEdit help.
It is possible to create any language using a code page supported by the controller:
 Win 1250 – Middle Europe
 Win 1251 – Eastern Europe (Cyrillic)
 Win 1252 – Western Europe, America
 Win 1254 – Turkish
 GB2312 – Chinese
NOTE:
See the Operator guide for information on how to select the controller front panel language.

ComAp InteliCompact NT Specifications

General

Brand	ComAp
Model	InteliCompact NT
Category	Controller
Language	English