ComAp InteliCompact NT Reference Guide

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
241
Value: IOM Bin Out
Group
Extension I/O
Units
-
Related
applications
All
Description
This is a bit array containing the status of physical binary outputs of the
IOM/PTM module. Bit0 represents BO1, bit1 represents BO2, etc.
NOTE:
In LiteEdit and on the controller screen this value is displayed in “normal
order”, i.e. BO1 in the leftmost position.
16.2.8 Group: Statistics
Value: Energy kWh
Group
Statistics
Units
kWh
Related
applications
All
Description
Active energy counter.
Value: Energy kVArh
Group
Statistics
Units
kVArh
Related
applications
All
Description
Reactive energy counter.
Value: Run Hours
Group
Statistics
Units
h
Related
applications
All
Description
Engine operation hours counter. If an ECU is configured and it provides
engine hours value, the value is taken from the ECU. If the value is not
available from the ECU or if an ECU is not configured, the engine hours are
incremented in the controller while the engine is running.

ComAp InteliCompact NT Specifications

General

Brand	ComAp
Model	InteliCompact NT
Category	Controller
Language	English