ComAp InteliCompact NT

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
235
Value: Next Pwr Band
Group
Power management
Range [units]
-
Related
applications
MINT
Description
The values show which gen-sets (controller CAN addresses) will run if the load
demand rose above the upper limit of the current power band.
16.2.6 Group: Controller I/O
Value: Battery Volts
Group
Controller I/O
Units
V
Related
applications
All
Description
Controller supply voltage.
Value: D+
Group
Controller I/O
Units
V
Related
applications
All
Description
D+ terminal voltage.
Value: Analog Input 1
Group
Controller I/O
Units
configurable
Related
applications
All
Description
This is the value of the analog input 1 of the controller. It will contain an
invalid flag if the input is not used or sensor fail is detected on it.
Value: Analog Input 2
Group
Controller I/O
Units
configurable
Related
applications
All
Description
This is the value of the analog input 2 of the controller. It will contain an
invalid flag if the input is not used or sensor fail is detected on it.