InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
16.4.3 Alarm mirrors
Binary output: AL Gen Volts
This output is active when the generator under- or overvoltage alarm is
present in the alarmlist.
Binary output: AL Gen Freq
This output is active when the generator under- or overfrequency alarm is
present in the alarmlist.
Binary output: AL Overcurrent
This output is active when the generator overcurrent or short current alarm is
present in the alarmlist.
Binary output: AL Gen V,Freq
This output is active when the generator under/overvoltage,
under/overfrequency or voltage unbalance alarm is present in the alarmlist.
Binary output: AL Overspeed
This output is active when the overspeed alarm is present in the alarmlist.
Binary output: AL Underspeed
This output is active when the underspeed alarm is present in the alarmlist.
Binary output: AL Overload
This output is active when the overload alarm is present in the alarmlist.
To Next Page
Loading...
