Value containing total amount of consumed fuel by engine. The controller
automatically updates this value every 30 s. The controller can calculate it in
three ways:
- Direct reading from ECU
- Calculation based on actual fuel consumption reading from ECU
- Calculation from fuel level drop in tank (using Fuel Level AI +
FuelTankVolume setpoint)
NOTE:
The accuracy of Total Fuel Consumption depends on the precision of ECU
values or precision of FuelTankVolume and fuel level sensor.
Value of Period Fuel Consumption is calculated from the Total Fuel
Consumption. It can be reset by the PerFuelConsRes binary input.
To Next Page
Loading...
