ComAp InteliCompact NT Reference Guide

InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
237
Related
applications
All
Description
This is the actual PWM percentage on the AVRi output of the controller.
Value: GSM SignalLvl
Group
Controller I/O
Units
%
Related
applications
All
Description
IL-NT-GPRS module shows the strength of the GSM signal. It is a relative
value helping to find the best signal and for troubleshooting cases.
Value: GSM ErrorRate
Group
Controller I/O
Units
-
Related
applications
All
Description
IL-NT-GPRS module shows this information for relative evaluation of signal
quality. The lower value, the higher the signal quality.
Value: GSM Diag Code
Group
Controller I/O
Units
-
Related
applications
All
Description
Diagnostic code for the IL-NT-GPRS modem. Standard GSM modems usually
support this value as well. Helps in troubleshooting.
TABLE OF DIAGNOSTIC CODES
Code
Description
0
OK. No error.
1
Not possible to hang up.
2
IL-NT-base is switched off
3
IL-NT-GPRS is switched on
4
IL-NT-GPRS – error in initialization
5
IL-NT-GPRS – not possible to set the APN
6
IL-NT-GPRS – not possible to connect to GPRS network
7
IL-NT-GPRS – not possible to retrieve IP address
8
IL-NT-GPRS – not accepted DNS IP address
9
Error in modem detection
10
Error in initialization of analog modem
11
SIM card is locked (Possibly PIN code required, PIN needs to be deactivated) or
unknown status of SIM locking
12
No GSM signal
13
Not possible to read the SIM card parameters

ComAp InteliCompact NT Specifications

General

Brand	ComAp
Model	InteliCompact NT
Category	Controller
Language	English