InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
Binary output: ExtBI 2 Status
This output gives information about the status of binary input 2 of the
extension module.
If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
If the related binary input is configured as functional, the output
copies directly the status of the input.
Binary output: ExtBI 3 Status
This output gives information about the status of binary input 3 of the
extension module.
If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
If the related binary input is configured as functional, the output
copies directly the status of the input.
Binary output: ExtBI 4 Status
This output gives information about the status of binary input 4 of the
extension module.
If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
If the related binary input is configured as functional, the output
copies directly the status of the input.
Binary output: ExtBI 5 Status
This output gives information about the status of binary input 5 of the
extension module.
If the related binary input is configured as an alarm input, the output
is closed when the assigned alarm is present in the alarmlist.
If the related binary input is configured as functional, the output
copies directly the status of the input.
To Next Page
Loading...
