ComAp InteliDrive DCU Industrial - Page 113

InteliDrive DCU Industrial 3.4.0 Global Guide
113
Setpoint group
Communication
Settings
Related FW 3.4.0
Range [units] [9600, 19200, 38400, 57600, 115200] [bps]
Default value 9600
Force value
Alternative config
Step [-]
Comm object 24420 Related applications AS, SS
Description
The setpoint adjusts communication speed of the RS485 interface when RS485 Mode (page 113) is set to
Modbus.
RS485 MBCSpd
6 back to List of setpoints
Setpoint group
Communication
Settings
Related FW 3.4.0
Range [units] [STANDARD, MODBUS, ECULINK]
Default value STANDARD
Force value
Alternative config
Step [-]
Comm object 24451 Related applications AS, SS
Description
Communication protocol selection.
STANDARD: InteliDrive (DriveConfig, InteliMonitor, Remote panel) communication protocol.
MODBUS: Modbus RTU protocol.
ECULINK: Connection to an electronic-controlled engine which uses non-J1939 ECU. The proper
ECU type must be also configured with DriveConfig.
Note: Detailed description of Modbus protocol include some examples, see in InteliDrive
Communication guide.
RS485 Mode
6 back to List of setpoints