InteliDrive DCU Industrial 3.4.0 Global Guide
169
Related FW 3.4.0 Related applications AS, SS
Comm object 141
Description
Active input blocks indication of ECU communication fail e.g. in the case the ECU is switched off.
Note: LBI:ECUComFailBlck is possible to use during ECU initialization for start of the engine, when
ECU POWERRELAY (PAGE 206) is used. By simple logic in PLC editor is possible to avoid alarms while
the ECU is getting started. Also at the same time this LBI gives you flexibility to decide, when the
communication alarms from ECU are relevant.
Example: of PLC Editor
ECUComFailBlck
6 back to List of LBI
To Next Page
Loading...
