ComAp InteliDrive DCU Industrial - Page 208

InteliDrive DCU Industrial 3.4.0 Global Guide
208
Related FW 3.4.0 Related applications AS, SS
Comm object 1462
Description
The first press of Horn Reset panel button activates the new HRNRESBTTOGGLE (PAGE 208), the second
deactivates it. The function operates in all engine modes and states. Current Horn reset function of panel
button HornReset is still active.
Note: Horn reset function works for remote access from DriveMonitor, Modbus, Modem, ... as well
HrnResBtToggle
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 1832
Description
Indicates that emissions related engine fault code is active.
MalfunctLamp
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 449
Description
Indication of active Load sharing.
ActLoadShar
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 620
Description
AirFlaps output is activated with engine starting (when controller enters state Cranking) and it is deactivated
5s after engine stopping.
AirFlaps
6 back to List of LBO