ComAp InteliDrive DCU Industrial - Page 222

InteliDrive DCU Industrial 3.4.0 Global Guide
222
Related FW 3.4.0 Related applications AS, SS
Comm object 535
Description
The output is closed while the alarm generated by the PLC block Force Prot is present in the alarm list.
PLC Message 14
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 792
Description
The output is closed while the alarm generated by the PLC block Force Prot is present in the alarm list.
PLC Message 15
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 793
Description
The output is closed while the alarm generated by the PLC block Force Prot is present in the alarm list.
PLC Message 16
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 260
Description
Indication of EMERGENCYSTOP1 / EMERGENCYSTOP2 (PAGE 170).
Emergency Stop
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object
Description
Engine speed state indication. Output is closed when no RPM is received from J1939 (sensor fail) or
Overspeed or Under speed is detected.
Engine RPM
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object
Description
Active overload protection activation.
Overload
6 back to List of LBO