ComAp InteliDrive DCU Industrial - Page 264

InteliDrive DCU Industrial 3.4.0 Global Guide
264
Analog CU
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [V]
Comm object 8213 Related applications AS, SS
Description
Internal Voltage measured on controller board.
Battery Volt
6 back to List of values
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [°C]
Comm object 10124 Related applications AS, SS
Description
Internal Temperature measured on controller board.
CPU Temp
6 back to List of values
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [V]
Comm object 10603 Related applications AS, SS
Description
Engine alternator output voltage detected at D+ controller terminal.
D+
6 back to List of values
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [Bar]
Comm object 9155 Related applications AS, SS
Description
Oil Press
6 back to List of values
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 9156 Related applications AS, SS
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 2" is just default value which can be changed in analog input Property: Name.
AIN CU 2
6 back to List of values