ComAp InteliDrive DCU Industrial - Page 265

InteliDrive DCU Industrial 3.4.0 Global Guide
265
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 9157 Related applications AS, SS
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 3" is just default value which can be changed in analog input Property: Name.
AIN CU 3
6 back to List of values
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 9158 Related applications AS, SS
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 4" is just default value which can be changed in analog input Property: Name.
AIN CU 4
6 back to List of values
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 9159 Related applications AS, SS
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 5" is just default value which can be changed in analog input Property: Name.
AIN CU 5
6 back to List of values
Value group Analog CU Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 9160 Related applications AS, SS
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 6" is just default value which can be changed in analog input Property: Name.
AIN CU 6
6 back to List of values