InteliDrive DCU Industrial 3.4.0 Global Guide
332
0 – 250 Ω (suitable for Pt100, Ni100)
0 – 100 mV
0/4 – 20 mA
This module is compatible with MTU ECU-7 at communication speed 125 kbps when uploaded with firmware
11.0.0 and higher.
The detection of communication speed is indicated by fast flashing of status LED. Once the speed is detected
the module remains set for the speed even when the communication is lost. Renewal of communication speed
detection is done by reset of the module.
Dimensions
Note: Unit is 35 mm DIN rail mounted.
Terminals
BINARY INPUTS 8 binary input
ANALOG INPUTS 4 analog input
ANALOG OUTPUT 1 analog output
To Next Page
Loading...
