InteliDrive DCU Industrial 3.4.0 Global Guide
81
Speed governor output characteristics for Lo limit and Hi limit
setting above.
Speed governor output voltage in this case (when RPM1= 500
and RPM2=1800) is 9V when pressure is low and 2,5V when
pressure is high
11. Final PLC layout in DriveConfig
PLC locking sheet by sheet
From DriveConfigversion 3.8.0 it is possible to lock PLC Sheets individually in the controllers supporting this
feature. Available are 3 passwords, user can assign one of them to each PLC sheet or leave PLC sheet
unlocked.
To Next Page
Loading...
