InteliDrive DCU Industrial 3.4.0 Global Guide
82
New button on PLC toolbar to access password settings and login/logout. Button has 3 different colours:
All existing passwords are entered (all PLC sheets with password are unlocked)
Any (but not all) existing passwords are entered (any, but not all PLC sheets with password
are unlocked)
No existing password is entered or no password exists (all PLC sheets with passwords are
locked)
In Passwords window user can:
Login by entering correct password and clicking red button
Logout by clicking green button
Create/change password by slicking on "Change" button
To change password, current and new password must be entered. New password must be entered twice
(match check)
To create a new password, enter new password twice (match check)
Delete existing password
If password is used for any PLC sheet, password will be removed from appropriate PLC sheets (user has
to confirm this). Correct password must be entered.
If password is not used for any PLC sheet, password is removed immediately without warning. No need
to enter correct password.
To Next Page
Loading...
