9. Turn on external devices that are connected to the expansion base.
10. Be sure that the A/B drive selection switch is correctly set on the
expansion base (Section C.3).
NOTE: The C/D drive selection switch on the expansion base has no
effect when a Compaq LTE Lite is docked.
11. Turn the system on with the power button on the expansion base. (The
power switch on the Compaq LTE Lite is inoperable while docked in the
expansion base.)
NOTE: The first time you dock the Compaq LTE Lite or when you install
new devices, the system detects a configuration change and may
prompt you to run Computer Setup.
Use the Diagnostics diskette included with the SmartStation Adapter to
run Computer Setup, Computer Checkup (TEST), Power Management, and
Security Management. Do not use internal Setup or the Diagnostics
diskette included with the computer. Refer to Section 6.7 for more
information on running Computer Setup.
IMPORTANT: Do not undock the computer before reading "Undocking the Compaq
LTE Lite."
To Next Page
Loading...
Need help?
General