tape cartridge.
2. Replace tape drive.
---------------------------------------------------------------------------
xxxx - 18 No data detected. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 21 Drive command aborted. Replace the indicated device.
---------------------------------------------------------------------------
65xx - 24 Media hard error. 1. Back up data and perform
Surface Analysis to
reallocate defect.
2. Replace drive.
---------------------------------------------------------------------------
66xx - 24 Media hard error. 1. Replace current DATA CD with
different DATA CD.
2. Replace drive.
---------------------------------------------------------------------------
67xx - 24 Media hard error. 1. Ensure correct media type
for this tape drive.
2. Replace current tape with
new tape.
3. Replace tape drive.
===========================================================================
Error Code Description Recommended Action
===========================================================================
xxxx - 30 Controller timed out. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 31 Unrecoverable error. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 32 Controller/drive Replace the indicated device.
disconnected.
---------------------------------------------------------------------------
xxxx - 33 Illegal controller Replace the indicated device.
command.
---------------------------------------------------------------------------
xxxx - 34 Invalid SCSI bus phase. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 35 Invalid SCSI bus phase. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 36 Invalid SCSI bus phase. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 39 Error status from drive. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 40 Target timed out. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 41 SCSI bus stayed busy. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 42 ACK/REQ lines bad. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 43 ACK did not deassert. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 44 Parity error. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 50 Data pins bad. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 51 Data line 7 bad. Replace the indicated device.
---------------------------------------------------------------------------
xxxx - 52 MSG, C/D and/or I/O lines Replace the indicated device.
bad.
---------------------------------------------------------------------------
xxxx - 53 BSY never went busy. Replace the indicated device.