What causes 'Stitching of Camera X/Y failed' error on Contex GX67D and how to fix it?
If your Contex Scanner displays the error message 'Stitching of Camera X/Y (A/B or B/C or C/D) failed', this often means the internal glass plate or white background platen is dirty or smudged. Try these steps: * Clean the scanning area. * Reboot the scanner. * Then, complete the maintenance steps (alignment and calibration).
How to fix error message 'Correction of Camera X failed' on Contex GX67D Scanner?
If you receive the error message “Correction of Camera X (A, B, C, or D..) failed” on your Contex Scanner, it often indicates that the internal glass plate or white background platen is dirty or smudged. To resolve this: * Clean the scanning area. * Reboot the scanner. * Complete the maintenance steps, including alignment and calibration.
General| Type | Large format scanner |
|---|---|
| Maximum Scan Width | 67 inches |
| Optical Resolution | 1200 dpi |
| Interface | USB 3.0 |
| Color Depth | 48-bit |
| Scan Technology | CIS (Contact Image Sensor) |
| Supported Media Types | Paper, film |
To Next Page