CPI Paypod Embedded - Technical Characteristics

129
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Technical Characteristics
Paypod™ Embedded Pay Station
Published by CPI
Technical Characteristics8
The technical characteristics list
· Environmental conditions
· Noise emission values
· Cash processing data
· Quality requirements for banknotes
Environmental Conditions
Temperature range
Operation: 15–35°C/15–95°F
Storage: -20–+60°C/-4–+140°F, fully operational after three
days of storage
Relative humidity
Operation: 5–85%
Storage: 0–95%
Condensation
Not permitted
Noise Emission [ISO 7779:2010] [ISO 9296:1988-04]
Idle mode [bystander position]
29dB
Operating mode [bystander position]
Average noise level during one operation cycle
50dB
Max. noise level during operation with coins
79dB
Max. noise level during operation without
coins
72dB
Cash Processing
Coin input capacity
Up to 50EUR1-sized mixed coins at once
Coin acceptance
Capacity to validate and sort
Up to 8coin denominations, depending on currency and number of
hoppers installed
Capacity to process
Up to 50coins at once
Diameter
Depends on currency and coin recycler configuration
Speed
10coins/s max, acceptance of first coin in less than 2s
Coin payout
Change capacity
Up to 8coin denominations in up to 8single hoppers
up to approx. 335EUR1-sized coins/single hopper, larger double
and triple hoppers available
Speed
6coins/s max.
Capacity to payout
Return cup capacity of 50EUR1-sized coins
Banknote acceptance