45
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Design and Function
Paypod™ Embedded Pay Station
Published by CPI
3.6.3.7 E24 Banknote Loading Unit
The loading unit[1] of the E24banknote recycler is used
to reload the recycling units. For this, it can be removed
and filled with up to approx. 250banknotes of the denom-
inations stored in the recycling units. To guarantee proper
operation, these banknotes have to meet some quality re-
quirements .
You need the interlock system key to remove the loading
unit from the banknote recycler and another key to open the
cassette for refilling purposes.
E24 Banknote Recycler Loading Unit
3.7 Typical Transaction Sequence
After your customer selected the desired products,
you
· enter transaction via your POS screen
· sum up total amount due
· if applicable, select the means of payment: cash
Paypod™ pay station
· status LEDs ask your customer to pay the products and deposit coins or banknotes
· validates inserted cash and routes it to the appropriate recycling unit(s) or the cash box
· if necessary, pays out change as soon as total amount to be paid has been exceeded
· informs you about all money accepted and change given on the POS screen
· closes transaction to be ready for the next customer
131
To Next Page
Loading...