CPI Paypod Embedded - Operation; Switching the Paypod Pay Station on and off

46
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Paypod™ Embedded Pay Station
Operation
Published by CPI
Operation4
Read here how to operate the pay station:
· Switching the Paypod™ pay station on and off
· Starting POS software and log on/off POSlinq™ middleware
· Checking the Paypod™ pay station status
· Processing a transaction
· Opening the main screen
· Viewing cash stocks
· Opening and closing the Paypod™ pay station
· Easily accessing the payment components
· Opening and closing the coin recycler
· Removing and reinstalling banknote recycling units
4.1 Switching the Paypod™ Pay Station On and Off
The Paypod™ pay station is switched on and off with the power switch[1] on the left-hand side of the chassis:
1 Turn the on-off switch to the ON position[A].
If correctly connected to power, the pay station powers up.
· The coin input LED[2] flashes white (often seems to be blue)
· After the top LEDs flashed red all E23/E24banknote bezel LEDs[3] flash green
· The E22banknote bezel LEDs[4] are off
The pay station is ready to be initialized by the POS system.
46
47
49
50
52
52
53
56
56
60