80
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Paypod™ Embedded Pay Station
Handling Cash
Published by CPI
Closing Administration Screen
POSlinq™ Stocks Screen with Banknote Recycling Capacity and Cash
Box Content
The administrator receives a status e-mail giving details such as:
· POSlinq™ middleware transfer to cash box report type
· Terminal ID
· Alert report of recycling units' levels
· Paypod™ pay station inventory
· User ID
· POSlinq™ middleware version
This confirmation e-mail lists different parameters and information depending on the customized
configuration. It is also possible to configure various e-mails containing different details to be sent to
different addresses.
Read here how to empty the E22cash box or E23/E24cash box .
5.3 Dispensing Cash, Emptying Cash Recyclers
In order to ensure that all cash counters are decreased correctly, dispensing cash is controlled by the POS software
provided by our customers. The emptying process thus differs from application to application in terms of user interface
and the interaction with it, whereas the cash dispense process itself always remains the same. This chapter describes
the pay station's emptying process using the POSlinq™ middleware.
In case the recycling units reach the configured maximum capacity you should get a message signaling that coins or
banknotes have to be removed:
· Dispensing coins, emptying coin recycler
· Dispensing banknotes, emptying banknote recycler
5.3.1 Dispensing Coins, Emptying Coin Recycler
Use your POS software to shift the Paypod™ pay station into an emptying or dispensing mode to dispense single
coins from the coin recycler or all coins whenever you want to empty the coin reycler.
The easiest way to empty the coin hoppers is to raise the coin return cup allowing a larger box/bag to be positioned
under the return conveyor able to collect more coins. However, coins can also be dispensed into the return cup with the
pay station installed.
86 91
80
83
To Next Page
Loading...