CURTISS-WRIGHT 1
826448 VERSION 5 MARCH 2015 PROPRIETARY A-13
SAVING THE PINOUT TABLE
3. To save a pinout table to a text file, click the Save to File button. The Pinout Configura-
tor saves the table as a comma-delimited file, in which table cells are separated by com-
mas. You can import this table into any software application that can convert this format
into a table.
In Word, highlight the table text, then select Table -> Convert Text to Table.
DEFINING NEW XMC MODULES
The Pinout Configurator lets you add pinout configurations for additional XMC modules not
included with the utility. Follow these steps to define a new XMC module:
1. Click the Define New XMC button on the main window.
The Custom XMC window appears.
2. Enter a name for the module.
3. Enter the signal name for each pin in the text box corresponding to that pin.
4. If you want to save the module for future use, click the Save to File button.
5. To use the new XMC module definition, click the Add to XMC Lists button. The new
module is listed at the bottom of the drop-down list in the main window.
LOADING XMC MODULE DEFINITIONS
To load a previously saved XMC module definition file, follow these steps:
1. Click the Load XMC Def’n button on the Pinout Configurator main window.
2. Choose the text file containing the XMC module definition from the Open dialog box,
then click Open.
To use the loaded XMC module definition, click the Add to XMC Lists button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General