CHAMP-AV8 (VPX6-462) HARDWARE USER’S MANUAL CURTISS-WRIGHT
3-2 PROPRIETARY 826448 VERSION 5 MARCH 2015
INTRODUCTION
This chapter provides the following information and procedures:
• summary of installation prerequisites
• quick installation and power-up procedure
• detailed installation procedure
• displaying the initial screen message; and
• troubleshooting installation problems.
ELECTRO-STATIC DISCHARGE (ESD) PRECAUTIONS
Please refer to the CHAMPtools Software User's Manual for more detailed information
describing the BIOS and the PBIT capabilities.
This card uses components that are sensitive to electrostatic discharges. It must be kept in
its conductive package until the installation begins. Remove the card from its protective
package only at a grounded workstation while wearing an approved grounding wrist strap.
Avoid touching any metal contacts on the card; static discharge can damage integrated
circuits.
Turn the power off before inserting or removing cards from the VPX chassis. Failure to do
so could damage the card circuitry or cause personal injury.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General