To Next PageTo Next PageWhat to do if the sign-on message is garbled on Curtiss-Wright CHAMP-AV8?
If you're seeing a garbled sign-on message on your Curtiss-Wright Signal Processors, the terminal settings might be incorrect. Verify that your terminal is set to 115200 baud, 8 data bits, no parity, and 1 stop bit (115200, 8, N, 1).
General| Product Category | Signal Processors |
|---|---|
| Manufacturer | Curtiss-Wright |
| Memory | Up to 64 GB DDR4 |
| Form Factor | 3U VPX |
| Operating Systems | Linux, Windows |
| FPGA | Optional Xilinx FPGA |
| I/O Interfaces | Ethernet, USB, Serial, SATA |
| Operating Temperature | -40°C to +71°C |
Overview of the CHAMP-AV8 product's features and functions.
Concise summary of the CHAMP-AV8's key features and specifications.
Detailed technical explanation of the CHAMP-AV8's architecture and components.
Details on the Intel Core i7 processors used in the CHAMP-AV8.
Explanation of the CHAMP-AV8's PCI Express architecture and connectivity.
Details on the NOR Flash memory for BIOS and PBIT firmware.
Detailed specifications including VPX compliance, power, dimensions, and weight.
Information on voltage and current requirements for the CHAMP-AV8.
Specific voltage and current requirements for operating the CHAMP-AV8.
Essential precautions to prevent damage from static discharge.
Step-by-step instructions for installing the CHAMP-AV8.
Guidance on diagnosing and resolving installation issues.
In-depth description of backplane VPX connectors and their pin assignments.
