Curtiss-Wright CHAMP-AV8 - Figure 1.17: Status LEDS on Conduction-Cooled Variants; Location of Status LEDS on Conduction-Cooled Variant

CHAMP-AV8 (VPX6-462) HARDWARE USER’S MANUAL CURTISS-WRIGHT
1-38 PROPRIETARY 826448 VERSION 5 MARCH 2015
LOCATION OF STATUS LEDS ON CONDUCTION-COOLED VARIANT
For conduction-cooled variants, the Processor Status LEDS, the Fail LED and the Thermal
Failure LED, are all mounted on the top-side of the board assembly, as shown in Figure 1.17
below. A description of LED behaviour can be found in Table 3.7, “Summary of LED Behavior,”
on page 3-15.
Figure 1.17: Status LEDS on Conduction-Cooled Variants
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com