CHAMP-AV8 (VPX6-462) HARDWARE USER’S MANUAL CURTISS-WRIGHT
A-10 PROPRIETARY 826448 VERSION 5 MARCH 2015
VITA 46 P6
XMC/DIO/SATA/
USB Connector
The P6 connector on the CHAMP-AV8 supports the following functions/interfaces:
• XMC Site Differential User I/O (12 of the 20 pairs) from XMC J16 connector
(XMC_DP[09:04] and XMC_DP[19:14])
• DIO Signals (DIO[15:0])
See “CHAMP-AV8 P6 (XMC/DIO/SATA/USB) Connector Pin Assignments” on page A-33 for
additional details.
USING THE CHAMP-AV8 PINOUT CONFIGURATOR
The backplane pinouts of the CHAMP-AV8 vary according to the XMC modules installed on the
basecard. The Continuum Support Center website (http://csc.cwcdefense.com) provides a
Windows utility that generates the pinout configuration based on the modules installed. This
utility lets you choose from existing Curtiss-Wright XMC modules, or describe pinouts for
third-party or future Curtiss-Wright modules. Figure A.6 shows the Pinout Configurator’s Main
Window.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...