CURTISS-WRIGHT HARDWARE INSTALLATION
826448 VERSION 5 MARCH 2015 PROPRIETARY 3-13
DISPLAY THE INITIAL SCREEN MESSAGE
After power on, you have the option (available for about three seconds) to press the F2 key
to activate the BIOS setup utility. If you don’t press the F2 key, then you will see the following
GRUB (GRand Unified Bootloader) loading message as follows:
Figure 3.3: GRUB Loading Message
After a couple of seconds, you will see Linux start loading, ultimately concluding with the login
prompt as shown below:
Linux AV8 2.6.39.3 #45 SMP Fri Sep 7 10:44:41 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux
Fedora release 10)
AV8 login:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...