CHAMP-AV8 (VPX6-462) HARDWARE USER’S MANUAL CURTISS-WRIGHT
A-46 PROPRIETARY 826448 VERSION 5 MARCH 2015
Tables A.30 through A.35 list the row by row pin assignments for the connector referenced
J16.
J16 Row A Table A.30 lists the pin assignments for Row A of the connector referenced J16. The table
maps the J16 Row A XMC User I/O signals to the corresponding VITA 46/48 P5 or P6 connector
pins of the CHAMP-AV8 board. The signals are routed as high speed differential signals in
accordance with the P5w3P6–X38s+X8d+X12d pattern defined in VITA 46.9.
Table A.30: XMC J16 User I/O Connector Description (Row A)
XMC J16
Row A Pin
Number
VITA 46/48
P5/P6 Connector
Pin Number
Direction Description Electrical
Characteristics
J16-A1 P5-E13 I/O XMC_DP0_P connection to P5 connector Depends on XMC module
J16-A2 GND GND GND
J16-A3 P5-F14 I/O XMC_DP2_P connection to P5 connector Depends on XMC module
J16-A4 GND GND GND
J16-A5 P6-E1 I/O XMC_DP4_P connection to P6 connector Depends on XMC module
J16-A6 GND GND GND
J16-A7 P6-F2 I/O XMC_DP6_P connection to P6 connector Depends on XMC module
J16-A8 GND GND GND
J16-A9 P6-E3 I/O XMC_DP8_P connection to P6 connector Depends on XMC module
J16-A10 GND GND GND
J16-A11 P5-E15 I/O XMC_DP10_P connection to P5 connector Depends on XMC module
J16-A12 GND GND GND
J16-A13 P5-F16 I/O XMC_DP12_P connection to P5 connector Depends on XMC module
J16-A14 GND GND GND
J16-A15 P6-F4 I/O XMC_DP14_P connection to P6 connector Depends on XMC module
J16-A16 GND GND GND
J16-A17 P6-E5 I/O XMC_DP16_P connection to P6 connector Depends on XMC module
J16-A18 GND GND GND
J16-A19 P6-F6 I/O XMC_DP18_P connection to P6 connector Depends on XMC module
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...