Code 39
Product Reference Guide 135
ENTER/EXIT PROGRAMMING MODE
Code 39 — cont.
Code 39 Set Length 1
This feature specifies one of the bar code lengths for Code 39 Length Control. Length 1 is the
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed
Length Mode. Length includes the bar code’s data characters only.
The length can be set from 0 to 50 characters. See Set Length 1 on page 268 for more
detailed programming instructions.
$CC3L1
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
~
CANCEL
DEFAULT
02 = Length 1 is 2 Characters
To Next Page
Loading...
