Datalogic QuickScan Lite QW2100 - Good Read: When to Indicate

LED and Beeper Indicators
Product Reference Guide 23
ENTER/EXIT PROGRAMMING MODE
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or flash its green LED)
upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS goes inactive, then active
NOTE
This option, which uses CTS, is only valid for RS-232
interfaces.
$CBPIN00
Indicate Good Read = After Decode
$CBPIN01

Indicate Good Read = After Transmit
$CBPIN02

Indicate Good Read = After CTS Goes Inactive, Then Active
DEFAULT
$CBPIN00